Reads a raw TR Configuration memory. Bit values for [C] (bit 0), [N] (bit 1), and OS (bit 2) peripherals stored at TR Configuration byte index 1 are set the same way as in Peripheral enumeration.
Request
|
NADR |
PNUM |
PCMD |
HWPID |
|
NADR |
0x02 |
0x02 |
? |
Response
|
NADR |
PNUM |
PCMD |
HWPID |
ErrN |
DpaValue |
0 |
1 … 31 |
32 |
33 |
|
NADR |
0x02 |
0x82 |
? |
0 |
? |
Checksum |
Configuration |
RFPGM |
InitPHY |
Checksum The Checksum byte XORed with all Configuration bytes gives 0x5F.
Configuration Content the configuration memory block from address 0x01 to 0x1F.
RFPGM See the parameter of setupRFPGM IQRF OS function.
InitPHY This value is read-only.
bits.0-1 RF band
00 868 MHz
01 916 MHz
10 433 MHz
11 Reserved
bits.2-3 Reserved
bit.4 1 if on-board thermometer sensor chip is present.
bit.5 1 if serial EEPROM chip is present.
bit.6 1 if transceiver is IL type i.e., for Israel region. See Device Startup.
bit.7 Reserved