Authorizes previously prebonded [Ns]. This assigns the [Ns] to the final network address. The command must not be used inside Batch or Selective Batch.
Request
|
NADR |
PNUM |
PCMD |
HWPID |
0 |
1…4 |
… |
n × 5 |
n × 5 + 1… n × 5 + 4 |
|
NADR |
0x00 |
0x0D |
? |
ReqAddr0 |
MID0 |
… |
ReqAddr n |
MIDn |
ReqAddr See Bond Node
request.
If 0xFF is specified then the prebonded [N] is unbonded and then reset.
Values 0x00 and 0xFF are not allowed if multiple [Ns] (more than 1) are
validated.
MID Module ID of the [N] to be authorized. Module ID is typically obtained by PrebondedMemoryReadPlus1.
Response
|
NADR |
PNUM |
PCMD |
HWPID |
ErrN |
DpaValue |
0 |
1 |
|
NADR |
0x00 |
0x8D |
? |
0 |
? |
BondAddr |
DevNr |
BondAddr Single [N] authorization: address of the [N] newly bonded to the network
Multiple [Ns] authorizations: 0
DevNr Total number of bonded Nodes
Error codes
ERROR_FAIL a. Nonzero ReqAddr is already used.
b. No free address is available when ReqAddr equals 0.
c. Internal call to nodeAuthorization failed when single [N] was
validated.
d. Some ReqAddr is out of an interval [1;239] but multiple [Ns] are validated.