This command bonds [N] using the Smart Connect process. For details please see IQRF OS User's Guide. The command must not be used inside Batch or Selective Batch.
Request
|
NADR |
PNUM |
PCMD |
HWPID |
0 |
1 |
2 … 17 |
18 … 21 |
22 …23 |
|
NADR |
0x00 |
0x12 |
? |
ReqAddr |
BondingTestRetries |
IBK |
MID |
res0 |
|
24 |
25 … 33 |
34 … 37 |
|
VirtualDeviceAddress |
res1 |
UserData |
ReqAddr A requested address for the bonded [N]. The address must not be used (bonded) yet. If this parameter equals 0, then the 1st free address is assigned to the [N].
If this parameter equals 0xFE (IQMESH temporary address) then all unbonded Nodes within the RF reach of the current network and having the same Access Password as existing members of the network will be prebonded with the address 0xFE. When the 0xFE parameter is used please make sure all other command parameters are zeroed.
BondingTestRetries Maximum number of FRCs used to test whether the [N] was successfully bonded. If the [N] does not respond, it is unbonded at the Coordinator’s side. If the value is 0, then no test is performed and the command always succeeds.
IBK Individual Bonding Key of the [N] to bond.
MID MID of the [N] to bond.
res0 Reserved.
VirtualDeviceAddress Virtual device address. Must equal 0xFF if not used.
res1 Reserved. It must be filled with zeros.
UserData Optional data passed to the bonded [N].
Response
|
NADR |
PNUM |
PCMD |
HWPID |
ErrN |
DpaValue |
0 |
1 |
|
NADR |
0x00 |
0x92 |
? |
0 |
? |
BondAddr |
DevNr |
BondAddr Address of the [N] newly bonded to the network.
DevNr Number of bonded network Nodes.
Error codes
ERROR_FAIL a. Nonzero ReqAddr is already used.
b. No free address is available when ReqAddr equals 0.
c. ReqAddr is out of range of valid addresses.
d. Internal call to smartConnect failed.
e. None of the testing FRCs used to test the connection to the bonded [N]
succeeded.